Black Mamba - Fiberglass

Brilliant Design
Black Mamba is engineered to the MAX.
Maximum erodible wear volume.
Maximum bearing surface area.
Maximum flow area.
Maximum centralization.
Maximum material science.
Erodible Wear Volume (EWV)
Usable volume of plastic outside the associated coupling diameter.
By maximizing erodible wear volume (EWV), there is more raw plastic material to be consumed before the guide is considered worn out.

Flow Area
Black Mamba is less obstructive to fluid flow paths than a regular sucker rod coupling. Its like the guide isn't even there.
In a world where friction and drag are everything to rod string dynamics, we've engineered a guide that not only protects the rod better than anything on in industry, it operates in a way where the rod string isn't compromised on its free-fall speed from fluid dynamics. This is a huge win in rod lift.

Even Better Material
After testing dozens of materials, POKETONE is it.
Fiberglass rods are molded in our high-performance unfilled polyketone (UPK).
Our executive team has decades of experience in polymer science, with a specific focus on down-hole oil and gas applications.
There isn't a better material out there for rod guides, period. Best of all... Hyosung got the marketing color scheme right, too.
We design all rod guided tapers with a 0.06 friction coefficient, 3rd party lab tested.
FAQ
frequently asked questions
Does your guide stretch with the rod?
Yes, it does. The modulus of UPK (unfilled polyketone) is about 1/10th that of the fiberglass sucker rod. This means the guide is 10x more stretchy than the glass itself!
What rods can I get these guides on?
Black Mamba Fiberglass, Endurance, Superod, TRC - there is options. Send us your glass or holler at ELS and Black Mamba!
Isn't there a special process for guiding fiberglass?
Yes, there is. We mastered this in 2023 and have had rocket-ship success since then!
What does the fiberglass molding prep process look like?
All fiberglass rods are handled one at a time. Inside of the center wrap-around pad (the primary bonding area of the Black Mamba guide) there is a small band of cured adhesive to provide an 'upset' or 'undercut' area for the guide to latch on to.
Do the guides ever slide along the rod body?
Hundreds of thousands of guides molded and to date, we've never seen it happen.
Regional availability?
Yep - call Black Mamba today, we can get you set up with our own fiberglass rods, or ELS!









